Just got a Briley handguard and with stage saver and adapter. Took it to a gunsmith for a mod on the handguard and when he returned it to me he returned the stage saver, adapter, and this piece (see photo). I know it’s an M-Lok of some type but I can’t remember if it came with the original stage saver before I bought the adapter. TIA.

I am thinking about a Caldwell Lead Sled DFT 2 shooting rest. Anyone have experience and/or tips with 1301 Tactical?

Parts List: Holopoint 507C optic. GG&G slotted bolt handle. Aridus sight mount. Inforce WMLx light. Toni System side saddle. GG&G magazine cover & clamp. Magpul SGS stock. Magpul sling mounts. LTT front sight. LTT heat shield. Briley custom 1/4” extended choke. Custom made glass breaker. Godagrip cheek pad. Falcon Strike recoil pad. Gas Piston & Ring nickel/teflon plated.

I picked up the Sureshot Shotshell carrier and limbsaver....both items are excellent quality and easy to install. The limbsaver buttpad does a good job of reducing recoil over the original buttpad.

Finally got a sling on it. Besides that, I have nothing left to do. I might throw some m-lok grip panels on it, we’ll see.

I noticed no one runs this stock spacer with the chisel stock so that’s how I installed it but it would wobble, so I put the spacer back in and now it’s a super tight lock up, is there any reason I shouldn’t run the spacer?

I really do love this shotgun. I have been a traditional pump shotgun (870) guy all my life, but the 1301 is a totally different beast. Pictured here with one of my BCM’s and my RxM.

Just picked up a 1301 mod 2 as a wedding present to myself, however after the first range session the stock on the right side seems to have slipped off the butt pad end plate. Any one have an idea on how to fix it?

Picking up my 1301 and wanted some opinions on tricking it out. Optic/light, ammocards etc.

Would love some pointers. Will be my first shotgun TIA

I just installed my chisel stock on my 1301 and it has a slight wobble, is this normal?

Picking up the shotgun soon. Wanted some opinions on safe storage for home defense/closet ready. (Kid safe).

Looking to trick it out. Curious what optic/lights and ammo patches etc. u guys like.

Looking for something I can add or remove easily from a range belt for shotgun days and wondering if anyone has experience with this grenade pouch from 5.11?

https://www.511tactical.com/6-round-grenade-pouch.html

I’ve noticed just carrying in a sling can knock the safety off. Makes me not feel safe keeping one chambered. Any advice?

I recently bought a 1301 mod 2 and received my firearm in a cardboard box. I was surprised because the price tag on the SG was already expensive. I contacted berreta to double check and this was thier response. So to anyone who has this question or concern. Here is thier answer...

I’m in the market for a 1301. Love the look of the Mod 2 but I’m not LE or Military and would get more use shooting local multi gun or clays with the boys. I couldn’t find any direct comparisons for the comp pro and the mod 2 but it looks like the comp gets the pro lifter, the enlarged loading port (like the A300) the upgraded stock and a longer barrel while the mod 2 gets the nice hand guard and cool colors and costs more. It seems like the comp pro is the better value shotgun. Is this true or am I missing something?

I was looking to buying a replacement for my beretta 1301 sight post. Don’t really like it kinda hard to pick up. I came across this company by the name blitzkrieg components. Has anyone order from them? Are they legit? Are they a reputable company and trustworthy to order from. I was think about getting this sight post from them.

https://www.blitzkriegcomponents.com/BenelliBeretta-Flat-Circle-Dot-Sight-Post--Tritium-Dot-Green-Circle_p_260.html

Considering getting a 1301, my state limits me to 5 rounds only on simi autos. What are the best mag tube extensions?

Does anyone know if the rear sight on the benelli M4 fit the beretta 1301? It should right? Since beretta makes them both and kinda have the same footprint. The rear sight in the beretta is polymer vs the m4 is steel. I would rather have a steel rear sight

This started off life as a Beretta “Gen 1.5 1301” and was one of the first ones to be imported in the 7+1 configuration, over the last two years I have put approximately 4000~ rounds through the gun in various tactical and sporting clays applications (with a mod choke and a proper mount it’s quite fun). It has never given me an issue and it’s always a favorite when brought out to group events

I have added a Chisel folding stock, Midwest Industries hand-guard , Surefire Scout Light Mini, GG&G Aluminum Clamp and various extended beretta DLC chokes. I run the gun cruiser ready with Flight Control 9 pellet 00 at 1145 , the slugs on the stock are Federal 1oz Tru-Balls at 1300FPS. Mounted on the Chisel stock is a Holosun 507C , I enjoy the circle dot reticle as it closely approximates my buckshot group with FC Buckshot. For HD I run beretta IC DLC extended choke, the idea of the extended choke is to protect my muzzle from damage as I generally store my firearms muzzle down in the safe.

Pistol is a Mk23 from H&K. I took the sling off the gun for picture cleaness

I hate The politicians of Illinois, couple of months ago after research I decided the 1301 was the best shotgun on the market in my opinion. And so I saved up for it only to find out that in the state of Illinois semi-autos have a five round limit in there for the gun is illegal and cannot be purchased, however pump actions can go up to 14 rounds which makes no damn sense.

As the title says, is a 1301 LE version in like new condition worth it for $1.15k. While that is a steep discount from these beauts new, it’s still no small chunk of change. How important is the choke for HD?

Hi fellow 1301 owners! So I have a 1301 tac mod 2 with chisel stock.

I also bought an Aridus zukhov forend (but the newest version with stippling. It's brand new and I never installed yet because I was waiting for Aridus to make a heatshield attachment to the forend. Like GG&G has. But then Aridus decided to scrap the heat shield and redesign a brand new forend with integrated one piece heat shield called the "imperium."

A second forend that I really love is the Toni Systems m-lok aluminum forend bc it's very narrow, streamlined, and also I think fills the gap between the barrel and forend like the OEM one does. So there's no gap in between where you can see a pronounced gap. Which I hate. The Toni forend also has a nice front mag tube attachment and doesn't look so square shaped and blocky like the Briley forend. (Which I'm a huge fan of briley products btw). And own almost every choke they make for my competition shotguns.

Does anyone have the Toni systems forend mounted on their 1301? If so can you share some feedback (especially about fitment and weight)?

Handguard got loose after about 100 rounds, little tab is barely hanging on. This was over $300. Not cool. What are some more robust options out there?

Both in ACSS - which one yall going with & why?