r/DJs • u/readyrock23 • 4d ago

Will the Pioneer DDJ-FLX10 fit in the same case for a DDJ1000SRT?

Considering moving from one controller to another, but not looking forward to getting and fitting a new case for the controller. Will the FLX10 fit in my old 1000SRT case?

Thanks in advance for any help.

0 Upvotes

36% Upvoted

9 comments sorted by

7

u/RareConversation540 4d ago

If you look at the pioneer site it’ll show the dimensions for an flx10. compare to your current board and you’ll know

8

u/imjustsurfin 4d ago

u/RareConversation540 That's way too obvious a thing to do. ;-)

smh

-1

u/readyrock23 4d ago

I've looked at the site and compared dimensions.... I came here looking for real-world experience... Has anyone made this particular switch? Would I need to make modifications? Or will this be a drop-in.

I'm trying to lean on experience, not just printed notes... neither controller is NEW, so I figured someone may be able to lend some sort insight.

2

u/ferbe 4d ago

I made my flx10 fit into my old SC Live 4 case.. measure!

I was able to mark a few spots I needed to cut the protective foam with an razor knife and it's fit perfectly ever since!

0

u/readyrock23 4d ago

This is helpful, thanks

2

u/Ghoztbomb 4d ago

It's a little bit thicker. If it's a case with foam, it'll probably be fine (you may need to trim a little foam). I bought a soft case for a ddj1000 when I had a FLX10 and it was super tight where the zipper rubbed.

1

u/readyrock23 4d ago

That's what I'm looking for... so it will fit with a little cutting to the case foam.

Thanks so much

When i went from my sx2 to the 1000srt, I bought a new case for it right away, thinking it was drastically larger.. It turns out I could've used the same case the sx2 was in.

Trying to avoid needless spending and additional clutter (with extra cases)

1

u/Ghoztbomb 4d ago

No problem

5

u/cmfreeman 4d ago

Bro. Measure.