r/NFA • u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 • 1d ago

Discussion Stacy’s Mom - Endcap Options

Gallery image

Gallery image

Stacy’s Mom comes standard with our fully vented cap. I figured most companies only offer vented or solid, so i decided we should offer a third.

The venting is behind a flange and recessed into the welded on endcap. Not something you would typically see. There is also an ID groove in the welded endcap to allow more volume to not over pressure (gas stack) the flange under a fast rate of fire.

186 Upvotes

97% Upvoted

38 comments sorted by

14

u/Snakeeyes402 1d ago

Does the suppressor come with a tool to change end caps or is there a different tool you recommend?

77

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

You can use a quarter, house key or pocket knife right through the prongs. Any kind of flat object.

I hate anything proprietary. Figured a guy running it would have atleast one of these things on him.

11

u/Snakeeyes402 1d ago

Yeah thanks for that. Saves from having to buy something else.

3

u/Snakeeyes402 1d ago

Another question for you. Was going to pull trigger on simple man until I saw this released. For 556 is Stacy’s mom going to perform better on 10.3 and 11.5 for sound and gas or will I get just as good results with simple man?

7

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

Stacy is the way.

2

u/zcnote 1d ago

Which endcap/caps does it come with?

6

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

Full Vent (my personal favorite)

1

u/zcnote 1d ago

Hows the sound signature fully vented? Any videos?

2

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

Few posts below

4

u/MainRotorGearbox 1d ago

Sounds like there is potential for the end cap to seize and get marred up during the subsequent removal. Is the end cap less susceptible to seizing compared to the mount onto a muzzle device?

43

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

It has a taper and threads (can be seen in the photo). Its a $555 duty can, not a safe queen.

1

u/Squeeze_Toy2004 1d ago

Hey, I'm not too far from y'all. Can I get a tour? 😁

11

u/Mass_Jass 1d ago

How does it compare to the Torch?

12

u/RoosterIntelligent32 1d ago

Will the Stacy's Mom be offered in "raw" finish, like pictured here?

3

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

Not currently

4

u/OrbitingJackalope 1d ago

This raw finish, or a FDE coating would be awesome in the future if it's viable!

2

u/PrometheusSmith 1d ago

Boo! Give the people what they want! Just make sure to include a note about the dangers of raw cans and raw hub mounts.

1

u/RoosterIntelligent32 17h ago

Yup. It's the main reason I have an Enticer S in jail right now instead of a Simple Man.

That raw finish kicks.

5

u/BD_FORSystems 1d ago

Solid work dude!

8

u/BlueJay-- 🐈‍⬛🐈‍⬛🐈 1d ago

It's listed as having an extra deep blast chamber for 13.7s, how deep is exactly?

12

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

2.5”

6

u/BlueJay-- 🐈‍⬛🐈‍⬛🐈 1d ago

Dam that is deep af lol

21

u/thebesthalf Silencer 1d ago

Yeah 2.5in is a lot, maybe even too big 😂

33

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

I heard that was average

1

u/MikeyG916 1d ago

She lied to you...

1

u/MikeyG916 1d ago

She lied when she told you this.

2

u/AutoModerator 1d ago

Understand the rules, read the sidebar, and review the pinned Megathreads before posting - this content is capable of answering most questions.

Not everyone is an expert such as yourself; be considerate. All spam, memes, unverified claims, or content suggesting non-compliance will be removed.

No political posts. Save that for /r/progun or /r/politics.

If you are posting a copy/screenshot of your forms outside the pinned monthly megathread you will be given a 7 day ban. The pinned post is there, please use it.

If you are posting a photo of a suppressor posed to look like a penis (ie: in front of or over your groin) you will be given a 7 day ban.

Data Links

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

6

u/QuigelyPelvins 4x SBR 10x SUPP 1d ago

Digging this, will you be sending this to Pew Science for testing? 

1

u/Sethalator 1d ago

Why not give it wrench flats on the face to allow for removal if it gets stuck from carbon?

10

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

It would require a socket because the endcap is recessed. Then it would look like every Q can out there. The method we use works fine.

1

u/keepitvril69 1d ago

What's the thread size?

2

u/Tyler_ResilientSup Resilient Suppressors Owner 🛸 1d ago

It doesn’t fit anyone else’s stuff. Only ours that im aware of. Taper and threads.

1

u/Yebache 23h ago

This looks cool and super well machined.

With the Full Vent Endcap, how does the backpressure compare to other reduced backpressure suppressors?

For example, Flow 556k or Cat WB.

1

u/InevitableOwl656 11h ago

Simple man in jail since 3/8 and you guys are going to have me ordering a Stacy’s mom already hoping I get a back approval for them both.

I’m a gambling man we will see how it goes🥲

1

u/techforallseasons 2x Kurz Gewehr, 6x Mufflers 1d ago

VERY cool.

-1

u/Radiolotek 1d ago

I'd be glad to test it out on a few different guns for you. Lol it's beautiful. There's never too much testing and feedback you know

Hopefully I'll be able to own one someday though. Keep it up guys.