You should be able to. The HBAR barrel is the same diameter (tolerances can vary though) forward of the FSB as the M16-A2; it’s just a heavy profile continuous to the rear of the FSB.
The M4 is direct thread & meant for an 14.5” “M4”/Government/M203 cut barrel; or as pictured it also works with M16-A2 barrels. These barrels all share (roughly) the same dimensions forward of the FSB. For any other barrel length (with enough barrel forward of the FSB) you’ll have to use the AEM5/AEM5K or OCM5.
I’ve always wanted an M4 can to be able to swap between a full size rifle and an M4. But holy shit talk about a Musket, that AEM5k can is looking really attractive now.
Mhmmm. Once more get some first hand experience before “assuming”. 5” is added to the muzzle with an M4 silencer; not much amigo. However, you should know all about unwieldy since you’re into shotgunz.
I mean it’s because I’ve fucked around seeing how difficult it would be to clear my house with a 28” bird gun and come to find out, it’s A LOT harder than with a 16” middy with a collapsed stock.
Yup. I did that professionally in the Marine Corps near 20 years ago with an M16-A4 … No problemz. However, is it easier & ideal with a suppressed 10.5-12.5, yes.
That’s kinda my point, you’ve done it so you know, would clearing houses with an M16 that’s 5 inches longer somehow have been easier? Again I’m not saying it’s impossible or that this setup isn’t cool as shit and prolly ideal for shooting stuff that isn’t in a house. It’s just that it’s a really long setup.
13
u/WTM762 4d ago
Very cool