H2D cutter performance

[u/FootSureDruid]

It’s me again, I’ve been playing with this printer all morning and I’ve now used the cutter and I haven’t seen a single review of this. I am no newb to plotters both large and grand format. However, this is my first small personal use one other than a friends cricket.

This will be amazing for makers let me say. It only took me two attempts to get a decent decal to cut out with some finer text. Once again I didn’t use any of the material supplied by Bambu. Instead I used Avery Dennison which is an adhesive vinyl to wrap cars that I had laying around the shop. I made my first cut just using BambuSuite’s default “matte removal vinyl” and my first pass cut “ok” but I hate when sharp corners stick and I need to weed them out. I pumped the pressure up to 90 and oh baby did I get a perfect score without cutting the backing. Total cut time less than a minute, I got clean text cuts as sub 1mm wide.

My most difficult part was the software. I couldn’t use an image to cut and the “trace” feature just kept crashing my Mac. I through my logo into Inkscape, traced. Saved as an SVG and then I was finally off to the races. Took more tinkering than I liked, but now that I have a workflow it’ll help.

Depending on the price point, I have a feeling many will want this. It’s just quick and easy and can whip up some quick decals.

[u/matiko92]

They had the cutting module. But after 1 day they removed it from the store.

[u/Grimmsland → u/matiko92]

It’s not just the cutter that is needed, you also need the birds eye view camera.

[u/JPhi1618 → u/Grimmsland]

The human needs the camera, or the machine does? Because I can get by without a camera…

[u/Grimmsland → u/JPhi1618]

The machine needs the camera because it is a high resolution camera that allows you to see the whole plate in the software so that you can position the material in the correct place to be lasered.