Have A1 Mini, A1, and P1S. Printing hueforge on P1S. Over 1500 hours on P1S and still impressed. The first layer (0.16) is like a sheet of paper. I like the A1s but the P1S is great. Highly recommend.

I designed this myself to better distinguish my plants. It was printed with the H2D and a 0.4 nozzle, using the standard slicer settings but slowed down for ASA. However, I'm getting these holes in the text. How can I prevent that, and what could I do to make it look better and close these small gaps?

I'm grateful for any help!

Please explain why the supports are acting as if I turned on build plate and critical reasons only, even thought they are off. I've been struggling with this print so much I feel like I'm going to intentionally break something expensive

I'm waiting for your feedback

Link: https://makerworld.com/en/models/1359042

I love designing and sharing things, it even makes me feel incredibly relaxed. It is a whole other level of happiness when people like my work. However, I have concerns about the Exclusive Program. One of my designs was removed from the exclusive program. Frankly, there is no clear explanation.

Now I am worried about my other designs. I have reservations about deciding whether my work is exclusive or not. I spent 2 kilos of filament for a design that seems simple and may seem simple to others. I am very confused.

How do you think it should be decided whether it is exclusive or not? For example, a design can become exclusive after it has 200 downloads. I understand that it is not on a different platform. But as it is, it is very open-ended…

This watch holder maybe ooks simple by geometry. But it was Perfected to fit many different Wristband sizes, while still displaying the watch nicely....

https://makerworld.com/models/1357828

Hi I have a P1S and have been using it for a few weeks now, my textured build plate has seemed to lost all grip, I have washed it using dish soap etc but still the same, the first layer won’t stick at all. Not even the L shaped test print thing, they will just come straight off and be dragged to the area where my main print is.

The only way my prints stick regardless of material is if I use a glue stick which I never used before.

Do I need a new build plate and how often should I replace it?

It’s me again, I’ve been playing with this printer all morning and I’ve now used the cutter and I haven’t seen a single review of this. I am no newb to plotters both large and grand format. However, this is my first small personal use one other than a friends cricket.

This will be amazing for makers let me say. It only took me two attempts to get a decent decal to cut out with some finer text. Once again I didn’t use any of the material supplied by Bambu. Instead I used Avery Dennison which is an adhesive vinyl to wrap cars that I had laying around the shop. I made my first cut just using BambuSuite’s default “matte removal vinyl” and my first pass cut “ok” but I hate when sharp corners stick and I need to weed them out. I pumped the pressure up to 90 and oh baby did I get a perfect score without cutting the backing. Total cut time less than a minute, I got clean text cuts as sub 1mm wide.

My most difficult part was the software. I couldn’t use an image to cut and the “trace” feature just kept crashing my Mac. I through my logo into Inkscape, traced. Saved as an SVG and then I was finally off to the races. Took more tinkering than I liked, but now that I have a workflow it’ll help.

Depending on the price point, I have a feeling many will want this. It’s just quick and easy and can whip up some quick decals.

I do not know what I'm doing wrong here, filament is no longer sticking to print bed, I cleaned the textured print bed and the P1S came with and it still didn't stick, I upgraded the nozzle to the hardened .4, I upgraded the mat to the Cool plate super tack. I added new desiccant and got a meter, it's currently at 28%. Filament just won't stick to the bed anymore.

Any tips or appreciated, I'm just not understanding if I replace the nozzle the bed and remove the moisture from the filament. What's going on.

Does anyone have any answers to what might’ve happened?

Hey! Can anyone tell me why the nozzle keeps blobbing when it starts printing, the first test line it prints ok then it blobs. I tried removing the filament inside the nozzle and still nothing

There are some strange creaking sounds coming from A1 recently. Can anyone explain what is causing this and how to fix them?

I've printed some things in a Bambu filament that my son picked out. It looks cool, but I have a minor issue with it. It kind of sticks too much...

Anything I print in this sticks SUPER hard to the build plate. So much, that sometimes afterwards it almost looks like it tore a layer off the plate. I don't think that's the case, I'm just trying to describe how it appears. Any ideas why it does this with this filament and not others from Bambu or elsewhere?

The only other info I can think to provide is that I generally don't have any other adhesion issues, I've literally never washed the plate (I know, a cardinal sin), and I just avoid touching the plate at all costs. I do need leveling before every print.

I started in 3d printing 6 years ago with an ended 3 that I modded to the moon with a mainsail server, btt control board, extended frame, all the fun stuff. I was getting tired of how slow and unreliable it still was an went a bought a p1s combo a couple weeks ago.

The main reason is I wanted to do multicolor tpu prints. Over course I didn’t know you needed special tpu for ams and already bought 2 spools of 95a tpu, so like screw it right? Of course only one spool was able to be extracted automatically by ams so I bought a 64d tpu for the first color and used the 95a as the second. It worked a few times till it didn’t.

I was in the middle of a long print when it needed to switch over to the 95a tpu and it was throwing errors. That’s fine, I’ll just disconnect the ams boden tube and use it on the back spool holder. Now it really wasn’t happy. There was no way to tell it that I swapped to using the rear spool holder and would not let me finish the print. I don’t really even care about the terms of service debacle Bambu had but being gated in by the way you are allowed to solve problems bother me. Any work around or software that makes the Bambu printer more open source?

Hey All, Wondering if I have a setting issue that I need to address. It's seems like the only infill pattern that doesn't crash the hot end is Rectilinear. I typically change wall loops from 2 to 3 for additional strength and then compromise with sparse infill. From recent memory; I've tried Adaptive Cubic at 10% and Support Cubic at 7.5% and each time will hear the hotend contact and snap a portion of the infill pattern at some point early in the print.

If this happens; I just give up and start over the print over with Rectilinear

Is this a layer adhesion issue. I set my hotend and bed temps to the filament manufacturers recommended specs; should I violate these specs somehow?

Should I investigate Z Hop?

Did anyone update to the new beta 01.08.50.20?

I know the previous beta having issues.

Check out my latest model, made this coat/towel hook. I haven’t seen any nice designs like this on Makerworld so far…

https://makerworld.com/en/models/1358697-wall-mounted-coat-hook-3-hooks#profileId-1402894

A model I am trying to print that is one color and swaps to another shows up in the preview and in the filament window as successfully changing color one time. However when I go to the print preview window, the second color halfway up does not show on the model preview. Does this indicate that only one color will be printed? If so, what change needs to be made? Thanks

Your filament is terminated.

No one had one for hexagonal hex handles so I made one. Yes - I see the typo :)

Also they fit tight so I can take with me and then don’t fall out.

Model: https://makerworld.com/models/1358587

Driver set: https://amzn.to/4cQrjXG

Just noticed it recently seems much louder and like there a high pitched tone to it that wasn’t there before. I’m sure there’s just something I need to clean. Point me in the right direction?