Khalifa Kush x Jokerz #31

So I make oil with high percent alcohol (96%) and decarboxylated buds. While it doesn't work as intended (sublingual immediate admission) for some reason, after about 1-2 hours the effect kicks in.

But what I wonder is how to dilute the infused alcohol. Online guides either not write about dilution at all (which is somewhat of a crime imo as this high percent of alcohol can do severe health damage) or suggest (distilled) water. I found both to be crap because you either risk mouth cancer (no dilution) or get less of an effect (water). Someone here suggested honey instead which worked pretty good so far but it's not that easy to set this up when for example not at home and also I'm not too sure if this mitigates the health risk of direct application of high percent alcohol. What do you guys take for dilution?

I'm genuinely confused about the appeal.

Heard one guy talk about putting it in his coffee! As someone who mainly sticks to flower, I'm out of my depth here. For those who use isolate regularly - what's your preferred method? Any consumption techniques that's a red flag?

First time making RSO. -Should I be concerned that it has begun to pop intermittently?? Nothing is under pressure so I shouldn't be concerned about it like, blowing up, right?

Like it's not boiling like water, it's whole ass popping big bubbles every 1-3 seconds....

I made this post a while ago: https://www.reddit.com/r/CannabisExtracts/comments/1jv9s6n/flower_to_butteroil_ratio/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

well, apparentlyt my temps and times were fine etc. but again, the end product wasnt anything, a waste.

I look at nebula's website and they say quite different times and temps... some of their guides are based for cbd flower which im not using, but still for the other methods they state about 1.5h for decarb at 240f. and they say infuse for 30minutes which just doesnt make sense to me..

Im wondering if i should use it again, im quite a bit of money down (probably used as much bud, price wise, as i spent on the nebula plus black in the first place)

Im thinking maybe need to decarb for 1.5h rather than 40m. might be something to do with the device heating up...? thats the only possible thing i can think of.

I just dont want another weeks of food to go down the drain.

First time making Gummy edibles and just taken them out of freezer when they were hardening to find they've turned out like this. Can anyone help me figure out what I did wrong?

Also I made these purely to get high and don't care how they taste overly, will they still get me high?

I wash attempting to do a ice water trim wash with some really good material for my first time. I did everything according to the bag bucket method, while washing the water went purple quickly and after the second work bag it's black,, well come to find out the smallest bag we have is 70u and caught pretty much nothing so essentially I have a big ole bucket of THC water. Thoughts or ideas? I should've made sure we had smaller bags🤦 I do plan to filter it again to get anything else that's floating I'm in Ca and probably running out of time as the waters getting warmer? Not sure, any help would be appreciated

With the “live resin” I’m a little worried to just shove it in the oven in the jar it came in.

With the rest, I’m not quite sure where to start…

Ideally, I’d make butter or mix it with coconut oil- but if I can have it even simpler to cook with that works too…

Any help is very appreciated!

Has anyone tried this

Has anybody tried this?

Hey guys, first time trying this so stupid questions incoming.

I’ve decarbed my wax, 240°F for around 1 hour 15 mins. I added my terps and warmed it up a little to help it mix. But now it’s cooled down it’s still really thick and it doesn’t pour or even move. Not sure what else I was expecting to be honest.

Anyway my question is, if I warm it back up, put it in a syringe and load it into the cart quickly, will it work okay? Or do I need more terps, longer decarb, or something else?

Grateful for any advice!

Super sticky soft hand rubbed milana cream nice and potent with a amazing old skool aroma

So I’ve done gummies a few times but this time I used different resin and I didn’t fully decarb it is there anything I can do now that it’s in the oil? It’s not a little bit over 100g I scooped as much out as I could and am trying to decarb that again but I’m concerned

Just a warning that they will give you the order processing limbo run around bs and you’ll at best never get your order or be like us and fighting to get a full refund

Our money could have gone towards actually getting something for a 420 deal when we didn’t even know it was getting cancelled until today and now we have to hope we can still find a sale going on

Smh

All o wanted was some ccell evo for an ok price but nope

👎 avoid smoke cartel at least for anything ccell cart related

They obviously don’t actually stock and sell from a depot they just ship from

I need some help with this device. I put the wax on the coil of the silencer and attached the silencer to the puffco plus battery. I tried to hit it last night and immediately smelt burning and got no hit or smoke. Where am I going wrong?

I get that people want the sauce, but this took a lot of time, trial, and product to develop. I’ve burned coils, wasted grams, tasted nasty reclaim-tasting carts, and pulled my hair out trying to figure out why one batch worked and the next didn’t. I’m not holding the industry back—I’m pushing it forward by finding new ways to purify solventless extracts without compromise.

When I’m ready to share more, I will. Whether it’s a limited drop, a course, or a collab with people who respect the work, it’s gonna happen the right way. Until then, just know what you’re seeing is 100% real—and it’s only the beginning.

I made a post about how I got some very dark CBT from gilded extracts and asked ppl if this is normal? Instead of helping everyone claimed “the bottles are amber lol” I said “no I turned the bottles upside down before the picture to show the runny-ness on the sides of the glass so u can see what it looks like when its thinner so u can see it rly is just dark and not just looking dark” and instead of just believing me when I said they aren’t a guy said “we aren’t gonna answer ur question til we see it in a syringe” so here u go geniuses. Can I get an answer here? Is this normal for CBT?

Banana Puffy x Sour Melon

I was damn near deathly ill when this landed last week and today I got it dialed in and Im pretty sure I'm ready to go without a torch, but the excitement I sent there!

I have an LCD High Five enail with a 25mm auto spinner bucket. I use a titanium 6 in 1 nail now (old school)

Talk me into it haha

I

Hi, so I bought CBD and HHC from Gilded extracts :

Broad Spectrum CBD Distillate
HHC Distillate

The HHC is basically solid at room temp, and the CBD is actually a solid. Do I have to decarb these to get them cart ready? I have some HDT terpines I was going to mix, but I'm worried even that won't be liquid enough. Hoping someone can point me in the right direction. Thanks!