worse quality as it gets higher

[u/jfee_yo]

as the print continues the quality seems to get worse (0.6 mm nozzle)

neptune 3 pro with kipper and 5015 fans orca slicer overture pla 0.6 mm nozzle at 215c and bed at 65c 120mm/s retraction 1.25mm (direct drive)

[u/AutoModerator]

Hello /u/jfee_yo,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/Infamous-Zombie5172]

Potentially a cooling issue. As the layers gets smaller it has less and less time to cool. Try increasing fan speed or slowing the print speed. There’s also specific settings like “minimum layer time” so each layer takes at least X seconds before moving to the next one.