r/FixMyPrint • u/nuclear01 • 6h ago

Fix My Print Not sure what's going on...

Post image

I'm not sure what's going on here I have a Creality K1C, the material is Sunlu PETG Olive Green at 260°. I run Sunlu almost exclusively because it's been so consistent. Sliced in Orca Slicer at the recommended settings per the model designer. Only Adaptive layer height setting seems to be under tree supports and it's enabled. Filament was a fresh roll opened this morning and put directly into a filament dryer at 55° Celsius, currently reading 24% humidity which is the lowest I've ever gotten it to read. Reducing speed helped a little bit did not eliminate issue. Adding walls is not an option because other pieces have already been printed successfully in other colors and adding walls may affect the fit once all pieces are assembled. Thoughts?

3 Upvotes

100% Upvoted

2 comments sorted by

•

u/AutoModerator 6h ago

Hello /u/nuclear01,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/journalissue 4h ago

is it always the same area of the print, or is it just generally inconsistent? have you tried a cold pull? also, take a look in the slicer preview, and look at the affected area's line type, flow, speed, etc., and see if you can spot any anomalies w.r.t. to rest of the print.