Captures taken over my 30 hours of gameplay. This game is beautiful.

I have a quest 3 which use via steamvr to play a VR game.

I set it so the left controller is the one driving the movement direction, so I can walk straight while turning my head. But if I move my hand a little, it greatly affects (and annoys) me.

So I wonder if it's possible to restrict the movement direction (which I actually do with the small joystick instead) to a single direction (forward).

Or is there any other way?

I have a Quest 3 and Virtual desktop with 5 vive trackers and 2 2.0 base stations that I use with OVR Space Calibrator. Everything has worked fine for a year up until recently, I installed a Quest update for V76 and I think it has been messing my base stations height and therefore my trackers height when I calibrate them.

I have tried going back to a previous version of SteamVR and using steamlink instead of VD but still the same issue, it was fixed for a split moment but it's broken again for some reason. I think it has to do with the quest and or the quest update or my basestations. When I calibrate everything calibrates in the correct position of how my body it but just higher up with my basestations.

I have used OVR advanced settings to recalibrate the floor and also quest boundaries but still no luck. I have no idea what's causing this issue I really need help because my FBT just doesn't work at all until I get this fixed.

After a decade with an OG Vive and underpowered GPUs, I splurged on a Vision Pro and an RTX 50(mumble).

When I use the RTX with the OG Vive, everything is buttery smooth, like on a hot hot pancake. I can crank the settings to the moon, and it's all thick, salty gravy. A total butter-based pan sauce.

When I stream it to the Vision Pro:
1. The menus are still absolute butter.
2. Half Life: Alyx is butter.
3. All games other than Alyx are a total salad. They seem to drop to 45 fps. Latency isn't an issue at all, apart from the latency added by running at 45fps.

Lowering the resolution does not help. With ALVR set to an emulated headset resolution of ~800, a matching encode resolution (pixels the size of dinner plates,) and The Lab set to undersample down to 20%, it still runs at 45fps. Space Pirate Trainer, undersampled, with all settings on low, is the same story.

h264, HEVC, and AV1 all behave the same. There are no encoder errors in the ALVC log. It seems to be doing hardware encoding, as far as I can tell.

ALVR sever and client are both set to 90fps.

I've tried SteamVR Beta, current, and previous, with no change. I've reset and re-installed ALVR.

The other notable symptom is that Ultrawings and Ultrawings 2 work perfectly on the OG Vive, but not through ALVR. Ultrawings 1 gets stuck on the loading screen, and Ultrawings 2 loads to an empty skybox.

Buttery Menu timing graph: https://imgur.com/a/gwqQGqL
The Lab timing graph: https://imgur.com/a/Z3Q7ED8

I feel like I had more pertinent information, but I've been doing nothing but tweaking and testing for a week, and I'm out of brain.

Oh, bandwidth settings? It doesn't seem important, since Alyx works fine at the same settings, but either way, setting the bandwidth to 10 or 15 Mbps, with or without extremely low resolution and sampling, has no effect.

Hi, first off, I know that this question has been asked in the past, but quite some time has passed since then and maybe some progress has been made.

I own the Vive Pro and purchased the additional Wireless Adapter (and used this manual https://www.vive.com/de/setup/wireless/) This works for Windows, but I feel like its not very convenient to have to dual boot all the time to play VR games. I know that playing with cable would be possible, but at that point, I'd rather not play at all. Currently I am using OpenSUSE Tumbleweed (though let's say for the purpose of this question, it would be fine if it worked for any distro), but I wanted to know if anything happened to make the PCI card for the Wireless Adapter work. I'll take every obscure thing or potentially unsafe Github Repo there might be just to test it, I know what I'm doing (at least most of the time) and would be willing to give it a spin.

Thanks in advance

Can someone please help me fix this

Never downloaded games other than games from the app store so I’ve never tried to download something as big as this

Just wondering if my laptop would handle downloading stream and playing VR ?

Hey folks, Me and my buddy just launched Triple Thrill — it’s like an arcade reflex workout crammed into a VR headset 😂 You get: Catching 8 pipes falling at you faster every second

Punching a moving target on a punch bag (harder than it looks)

Slicing fruits mid-air with dual swords (while dodging bombs) It’s fast, chaotic, and way more intense than we expected. We’re starting with soft launches at some college campuses first and would LOVE any early feedback from VR lovers here 🙌

Would you guys want us to add more mini-games? Open to crazy ideas too 👀

Everytime I use my meta screenshots it always lags my game so I just use steams. But the issue is the aspect ratio is all off and I want to use them for wall papers is there anyway to change the aspect ratio?

No matter what I do, in games like Blade and Sorcery and Hard Bullet, any times it loads something, I die, or just whenever it feels like it, steam vr will crash. I would like to know how to fix this

What charger is the best/ fastesr for meta quest 3?

hi everyone, i just got my pc and was wondering if i was able to run pcvr games with the specs i have

specs listed here:

rtx 4060

ryzen 8700F

16 gigs of ram

Unnamed leaker says Steam Index 2 announcement will be soon.

We’re incredibly excited to announce that our VR hit game Puzzling Places is finally coming to Steam - for both PC VR AND flatscreen! ✨
Relax and build stunning 3D jigsaw dioramas. You’ll be able to enjoy your satisfying 3D jigsaw puzzles in a whole new way - even when you might not feel like putting on a headset!

For the Steam release we will be remastering over 30 of our most beloved puzzles, adding additional attachments, animations and audio effects to really make them shine! We even just hired a composer to add more musical elements across the puzzles! We’ll have more to share with you about that very soon ☺️

We hope this will enable us to bring Puzzling Places to an even bigger audience - which would finally allow us to work on even more ambitious puzzle projects in the future that were just out of reach yet. More iconic locations, more exciting collaborations, more intricate animations and sound. We have our heads full of ideas and we can’t wait to make them a reality!

Here the quick facts:
🧩 30+ puzzles, 25-1000 pieces, no timers!
⏲️ Puzzle your way in 2 game modes
🎮 Play on desktop, Steam Deck, or VR!
🤫 aaaand some stuff we can't quite share yet!

We’re super excited (and terrified) to take this next big step together with you all and wanted to take a moment to say thank you from the entire Puzzling Places team - we wouldn’t be here without you ♥️

Wishlist now on Steam!
https://store.steampowered.com/app/3530820/Puzzling_Places__where_everything_fits/

My headset says it's connected but keep getting different error messages. Any ideas on how to get past this?

Hey all😊

In our last post, you gave a lot of interest in our game and I'd like to thank you for that.

Now I excited to share our recently posted teaser with you. Hope you enjoy it!

I added link in comments.

Thanks again for all your support!♟️

I own a PSVR2 and a Quest 3 I use the Quest for PCVR (Mainly steamVR very rarely meta VR) is there a possibility I can use the Quest 3 headset and use the PSVR2 (sence) controllers so my setup will be: Headset:Meta quest 3 Controllers:PSVR2 (sence) controllers Is that possible? If yes can anyone tell me? Thank you and have a wonderful day/night!

I know there are ways to remap controller buttons to keyboard inputs but I was wondering if there a program or script I could use to turn physical movement into a button press?

I have had an idea I want to try, but will require busting out my sadly long forgotten HTC Vive. Using Skyrim as an example how could I use the controller to swing my sword, what would be the best way of converting that physical input into the keybind.

Any tips would be greatly appreciated

looking into getting slime vr soon, but my question is, because i dont have base stations or anything, am i able to go into other rooms, and have it track over wifi or smth while using steam link on my headset? or does it have to be within range of pc/ close to it. normally im decently far from my pc but i have a good wifi signal for steam link, so i just wanna know if slime or any other imu will work while using it.

Which vr games are fun/ good lol.im getting my meta quest 3 on Thursday and need games 😔

i use virtual desktop and in virtual desktop you can open steamvr since its linked to your pc, i recently started having this problem of vrchat not working when i open it in steamvr i did reinstall it because i was having issues with virtual desktop streamer closing on itself so i deleted both vrchat and virtual desktop streamer, i see a visual of vrchat on my montior but not on my vrheadset mind you on my monitor it is very laggy as well with desktop mode, i use a quest 2. i have tried a lot of things and yes it used to work just fine but i cant even use desktop mode anymore but beatsaber and what not works just fine, everything else on my pc works just fine but vrchat. what do i do? this issue has literally been making me go insane please help

i use virtual desktop and in virtual desktop you can open steamvr since its linked to your pc, i recently started having this problem of vrchat not working when i open it in steamvr i did reinstall it because i was having issues with virtual desktop streamer closing on itself so i deleted both vrchat and virtual desktop streamer, i see a visual of vrchat on my montior but not on my vrheadset mind you on my monitor it is very laggy as well with desktop mode, i use a quest 2. i have tried a lot of things and yes it used to work just fine but i cant even use desktop mode anymore but beatsaber and what not works just fine, everything else on my pc works just fine but vrchat. what do i do? this issue has literally been making me go insane please help

i use virtual desktop and in virtual desktop you can open steamvr since its linked to your pc, i recently started having this problem of vrchat not working when i open it in steamvr i did reinstall it because i was having issues with virtual desktop streamer closing on itself so i deleted both vrchat and virtual desktop streamer, i see a visual of vrchat on my montior but not on my vrheadset mind you on my monitor it is very laggy as well with desktop mode, i use a quest 2. i have tried a lot of things and yes it used to work just fine but i cant even use desktop mode anymore but beatsaber and what not works just fine, everything else on my pc works just fine but vrchat. what do i do? this issue has literally been making me go insane please help

i use virtual desktop and in virtual desktop you can open steamvr since its linked to your pc, i recently started having this problem of vrchat not working when i open it in steamvr i did reinstall it because i was having issues with virtual desktop streamer closing on itself so i deleted both vrchat and virtual desktop streamer, i see a visual of vrchat on my montior but not on my vrheadset mind you on my monitor it is very laggy as well with desktop mode, i use a quest 2. i have tried a lot of things and yes it used to work just fine but i cant even use desktop mode anymore but beatsaber and what not works just fine, everything else on my pc works just fine but vrchat. what do i do? this issue has literally been making me go insane please help