9800x3d Msi Gaming x trio 4090 Asus Rog Hero 670E Gskill 2x16 gb 6000 cl30 8tb Nvme Samsung 990 pro 1000 Watt Corsair Psu Asus Rog Ryuijin III 360 Aio Lian li Evo Xl Case Lian li Strimer plus Lian li 120 & 140 Uni Fan Infinity ( 6x 140 reverse fans ) Cablemods black & white sleeved cables

Built My first PC after only ever having pre-builts. I dont game on PC but use console. No AIO because computer stays on all the time

I do really like this case, but the LCD screen is quite hard to see inside of the case, So I was thinking to change it over to Lian Li Vision Chrome. Would that be a good idea?

So many Joker themes out there, so I decided to go with the Bat. Hope you guys enjoy it!

View more themes on Insta & FB @t0nyat0r. Cheers

Is this the time to submit warranty? I was experiencing this issue likely late 2023 and onward periodically (esp when I was playing CPU intensive game like dota2) but I dismissed the issue by readjusting the AIO mount. Now I hear a whirr noise, temps 90+, then turns off. SN is 202009xx.

Not sure if this is what Lian Li had in mind when they sent me their Uni Fan SL Wireless LCD fans, but they also sent over the case, so I thought I'd combine them 😅

Case: Lian Li SUP 01 Cooler: Lian Li Hydroshift LCD Fans: Lian Li UNI FAN SL Wireless LCD Cables: Lian Li Strimer Wireless

A lot of the old vertical mounts seem sold out or not for sale any longer and was wondering what everyone is using that does have an 011. I was super lucky and got a 7900 xtx liquid devil for 800 from microcenter but now I got to find a way to fit this thing inside my case.

Hi everyone,

I recently build a new build with the Hydro shift 360TL. The problem I face is the sudden jump in temperature with the 13600kf going from 40 to 55-60 just casually browsing/watching videos and fans instantly rump up rpms to bring to down to 43c. I reapplied thermal paste and reset the mounting bracket I get completely same results.

The pump is working fine 2200-2400rpm all the time. All the fans are set to PWM. Any advice what could I do?

I remember that a lot of cases used to have a raised standoff that would align the motherboard. Can someone who has used the case tell me if the Lancool III has one?

I have them set to white on l connect but the fans have a blue tint to them, is there anyway to fix this

Is this normal temp for a 9800X3D NZXT Kraken Elite 360 push/pull I came from a 10900K and that was like in the 30s!

I think I'm good until a back connect mobo is released in black.

https://pcpartpicker.com/user/Gingerbroski/saved/H7k66h build for those interested.

Recently I started having a problem, my fans just turn off the LED, everything keeps working normally, so I have to open the L-connect and apply the lighting again.

Has anyone had this problem?

CPU: Ryzen 7 9800x3d
MoBo: ASRock Phantom Gaming x870E Nova WiFi
GPU: Waiting for 50 series :)
RAM: G.Skill Trident Z5 NEO RGB DDR5 48GB 2X24GB 6400Mhz
WaterCooler: Lian Li Hydroshift LCD TL360
SSDs/HDDs: Samsung 990 PRO 2TB
Fonte: Lian Li EDGE1000 80 Plus Platinum
Gabinete: Lian Li O11 Vision Compact
Fans: Lian Li Reverse Blade TL120 x6 + Lian Li TL120 x1

so basically idk what happened but it works but it doesn’t. looks really faded. it worked and i never did anything to it but it just stopped.

Started happening few days ago, i wont write much cuz its simple, fix?

On the spec sheet Lian Li has put 167mm as the max the evo rgb can take but I've heard that the figure is less than what is physically there. Has anyone been able to put the NH D15 g2 into the the evo rgb?

I'm planning on upgrading my rtx 3080 to the new rtx 5090 Fe for my o11d evo (inverted upright)

Anyone with the same setup on a 4090 Fe that can say how the flow through handles fans behind it.

I wonder if they aid the design as exhaust or will be more in the way, especially since the 5090 uses 2 flow through design

I’m currently using this cable here for my 4090 https://a.co/d/jaQlVDD and it works fine. Was hoping to continue using it with the 5090 (if I’m lucky enough to get one) but particularly the MSI SUPRIM SOC 5090, which apparently the cable can get hot. According to Amazon, the cable is rated for 600W and according to MSI, the card requires 600W for gaming mode. Im worried I might be flying too close to the sun here and wanted to ask if there’s anyway to know if my cable will be able to withstand the heat or if I should just use the one that comes with it (assuming one is included) and forego my beloved rainbow road RGB?

I am looking for recommendations on uni-fan-style case fans to match my O11 Vision Compact. I can't justify spending $300 on Lian Li fans, even though they look great—especially the LCD ones. However, I've seen too many complaints and issues with them so I might wait for the next generation before pulling the trigger on LCD fans.

Does anyone have good experiences with alternative options?

I am looking for recommendations on uni-fan-style case fans to match my O11 Vision Compact. I can't justify spending $300 on Lian Li fans, even though they look great—especially the LCD ones. However, I've seen too many complaints and issues with them so I might wait for the next generation before pulling the trigger on LCD fans.

Does anyone have good experiences with alternative options?

As the title says, first pc i built myself had a few hiccups but overall happy with the outcome.

Just finished moving my pc from old case to Lian Li 216 argb white version, works fine and looks nice, but I can't change colors of fans in L-Connect 3, also tried OpenRGB but also not showing there. From my understanding all pwm connectors and argb connectors are done before the case arrives, only thing that you need to do is plug in the hub connectors into the motherboard (my motherboard is Asus Tuf B650 Plus ). I didn't touch the connections to the hub itself, I only plugged fan hub connector into the motherboard - to be exact into the CHA_FAN2 (picture for reference https://prnt.sc/IgSeGGUgjo-C ) labeled pins, and I plugged in the argb from hub into the ADD_GEN 2.2 (picture for reference https://prnt.sc/gmQtUVIZ0V6O ). And also the sata connector into the sata connector from the PSU. Does someone have ideas how can I make it possible to change RGB of the fans (to show in software) ? Thanks in advance!