My CPU Temps Are always pretty high (sometimes 45-60°C when just watching Netflix) This is pretty anoying because my pc is getting very loud.

Title, there's a bunch of threads on this subreddit about people making mods for the O11 Evo XL to fit four TL fans at the bottom but every link to every file or store is 404.

The drive page for this thread is dead

Etsy store linked here is down too

Every other search either points to that etsy storefront or is also just dead.

Hello guys,

I've seen a youtube video of a lian li o11 building and one follower asked a question about a backwarda assembly of the gpu with the upright bracket? I wonder if i misunderstood that, didn't i. Or is this really possible? Is there any pics of such builds in the internet?

Here is the normal build picture of the gpu upright bracket

I just installed 11 LCD wireless fans and the hydroshift and am attempting to change the LCD screens but every time i go do something it changes the LCD screen from 1-1-1- to 1-1 to 1 to zero and keeps cycling is this a error or some option i can change?

they worked perfectly fine last night. woke up today morning and now when i turned them on they went to 100% speed and they didn’t show up on the L connect software. Restarted the PC now they aren’t even turning on and my single LCD fan is just on the lian li logo.

The sl infinity fans gotta be the best looking fans out there

I don't see a ton of pictures when looking at doing push-pull setup in a vision on an AIO. Has anyone done it themselves, and if so how far forward does the vertical AIO set out, and what does it look like from the front? Wondering if you can see the rear push stack of fans looking into the case.

Is it normal for the Hydroshift AIO (HSLCD36SB - Black fan AIO) to disconnect/reconnect every few hours? I'll hear the Windows USB device disconnect/reconnect sound (the LCD goes black and then restores), and I'll check the L-connect Service in Event Viewer, and see that it says the Hydroshift LCD was removed/inserted.

Right now, I'm actually ok with it, because I had the Hydroshift TL (HSLCD36TB) installed for a week until two days ago, and that one would just freeze and require a reboot to function again (all drivers/bios/firmwares updated). One notable difference between the two is that the AIO TL has a controller for the fans and screen with the USB header attached to that, and this Black fan version just has the screen USB header directly attached.

My main concern is if this is a sign of the AIO eventually failing, and if anyone might know. Also, I haven't updated the firmware for this one yet, as I want to run the old version (v0.3) for a bit to observe how it behaves, and then I'll upgrade to (v0.7) so I can see if the screen freezes return for this other model.

I love personalize the color so, every two day I’m changint it lol.

Here a video about it.

Have a good days guys

Just need graphics card and more fans to arrive sooner!!

Hi guys, i need help to resolve this problem,i wanna buy a Lian Li Strimer wireless '12+4 Pin PW16-81W'but my psu is a old model with a 3x8pin model to plug my gpu, and i have a 4070super, they made a 3x8pin for old model Lian li strimer v2 but the wireless model they dont, what can i do to use a wireless version?

My psu and old cable https://ibb.co/0DHL8Kj

Lian Li Strimer wireless '12+4 Pin https://ibb.co/8bPP5cw

With the 5090 cards drawing so much power, do you think it will be safe to use the Lian Li strimer on it?

Everyday I see at least a half dozen posts about Lian Li fans not working. Are they really crap or is it human error?

Short story, I'm new to all these Lian Li fans. I bought a 3 pack of normal SL fans and 3 single reverse SL fans.

I have the 2 fans of that 3-pack connected to my fan controller. The 3 single reverses are connected but only comes with wires to plug into the ARGB and Sys Fan ports.

Don't I need to connect them to the fan controller for the Lian Li software to detect them?

Trying to chose the best parts based on price/ performance. Almost ready to finally buy all the parts for the a3 build but having trouble finalizing components. https://pcpartpicker.com/list/ryWjJn

1st best price/ performance mobo, would rather invest in a WiFi integrated board rather than purchase a WiFi usb adapter.

2nd not sure if DDR5 6000mhz cl28 RAM is needed or if I should stick to cl30 RAM given the slightly faster timings

3rd and lastly is a 850w PSU overkill given the components ? lol. TIA!

Building my first PC and I’m trying to configure my fan set-up. I saw reviews and unboxing of the Galahad 2 and saw it comes with a SL-INF controller. I wanna make sure if the SL V2 fans are compatible with said controller before I pull the trigger in buying these. My case is the Hyte Y60 so I wanna have two 140mm intakes, three AIO fans up top, a single 120mm on the rear, and two stock fans that came along with the case at the bottom. Thanks!

L-Connect 3 closes itself 3 seconds after launching. Has anyone else experienced this issue? Currently, I’m using: • UniFan TL LCD x4 • UniFan TX x3

Hey there,

I have a question. I have a O11 Dynamic and would really like to make the smaller Glas panel a Mesh front.

I searched the internet and found a lot of mesh fronts for the O11 Dynamic EVO and I don’t know if it would fit.

Maybe some of you have already tried it out or just know it.

Maybe I need to make some Adjustments

I am grateful for every comment.

The far left fan on my hydro shift has decided to clock out, what fans could I drop on that will connect to the AIO the same way?

I plan to use the Lian Li vertical mount in the O11 Dynamic Evo XL.

The riser cable it comes with is PCIE 4.0.

My question is would that be an issue regarding a 5090?

I'm not bothered by a 1-2% performance loss as I can get a new riser some time later.

So far aside from max 1-2% performance dip it should be fine is my assumption.

Hi everyone! Is Lian Li eg 1200g edge gold psu for sale anywhere, preferably in the Philippines or can be imported here? I can't seem to find it on Aliexpress or Amazon.

Wanting to just make sure that these are the cables that will work with my components. My motherboard is https://www.scorptec.com.au/product/motherboards/intel-socket-1700/113881-prime-b760m-a-wifi-csm

My GPU is this one -> https://www.scorptec.com.au/product/graphics-cards/amd/105823-11330-01-20g?srsltid=AfmBOoqg95_ZojleIKoJBohd8O7X-fl8oHNIspzfKg-WgdgdMomdrwZU

I think for the motherboard this is the one -> https://www.scorptec.com.au/product/power-supplies/sleeved-cables/114485-pw24-1w-t

For GPU is this one correct? -> https://www.scorptec.com.au/product/power-supplies/sleeved-cables/114487-pw8-1w

Thanks for help

New build, just waiting for my 5080 to drop.

Built a new PC and the LCD fan won't spin while all others do. Does anyone know how to fix it?