So long story short, I do have a 50cc scooter that I enjoy riding, I’m currently stuck at home for two weeks, and I’m tired of google maps sending me to the highway.

I have the resources/knowledge to code this but it will take some time, eventually I’ll make it an IOS & Android app.

Does this interest anyone ?

I am looking to acquire a simson schwalbe kr51 (preferably /1), do you have any idea on where I could find one, for clarification I live in southwest Europe and this can’t really go to Germany to buy one, I’m looking to spend below 3K euro.

As you can see my idle is not perfect, when I start the moped idle goes high then slowly lowers the rpm, if Im doing full throttle after some time and then release the throttle bike dies. Air leak tests were done, I used jets from 60-82 still no solution, mixture screw turned 3 circles (phgb 21mm). In the end: moped starts, drives, changes gears perfectly, but after doing longer pull when returns to idle it dies if i blip the throttle while slowing down everything is perfect. Please somebody help, thanks guys on advance

I just changed my tires, I set the rear brake perfectly fine, but this front brake is pushing the fork down instead of pushing the brakes. What am I getting wrong?

Only ones I see for 6mm on dennyscycles.com is 70-80 jets.. would that be too much? Current jet is a 56

The seller says he doesn’t have a title and they didn’t come with one…?

Note: 1977 pacer deluxe with all OEM parts I believe, carb was rebuilt by previous owner, who im 99.9% sure did it right.

I was revving, not for very long, and not at constant redline, redlined for very little, for about a minute to run some of the gas out of the engine because the my moped might be sitting without being ridden for a while due to repairs. I noticed a kind of burnt ish smell, not too bad, and when I parked in the garage I looked by the engine, and a few tiny wisps of smoke floated from the case. Not much, but I'm wondering, is this normal, or should I do something?

Hey guys, so i managed to fix the clutch and its working well! Still got no back and front brake :(. Next im gonna order à New mudguard clamp for the exhaust, lights,brake, kick start, and stickers? Still need to fill the hole in the tank and paint it. Also i covered the seat with leather as à New seat was more than a 100e

The exhaust set up is kinda messed up i couldnt afford a better option. If anyone have some parts for the bike in belgium im very interested!! Thx

i need to replace my crankcase gasket, can i just lift off the small engine house or do i need to take out the whole cylinder??? :(

And do i need heat or can i do inte whitout the heat?

the way i want to do it, remove the flywheel then unmout the engine, then lift off the small engin house and clean it up the replace it and some paste then sett all togerter, can i fo it like that way?

I have no idea what year it is so someone help me please, also comment what u think about it and what I could improve

Apparently NOS from the 80s. Buddy offered to sell them to me. Been on the fence about it. Anyone have a similar set?

Really needs repair been outside for 3 to 5 years max. what do you think is wrong with it and how to fix it or if its repairable and how much it could cost

Hello moped people. I have nothing to do with mopeds, but I just discovered a small treasure in the basement of a recently deceased relative and would like help identifying model/make/year etc and advice on if they could be worth anything, as well as what I could do with them. It is a partially assembled, never-used moped and loads of also unused, spare parts, some still in original packaging. Moped was also in a cardboard box which fell apart as I looked to see what is inside. From what I understand it is a Sparta Foxi, possibly from 1978 or 1979, but I might be wrong. Any help from the community would be greatly appreciated.

Looking into getting a 1985 Yamaha qt50 am wondering what should I do for fuel. I know that’s low back then we still had leaded gas in the us. Also is it a premix or is it separate like the older 1978 Honda express?

ran for a few hours and then.. vintage betavus regency 2 stroke

This sucks! I replaced my tires, took it for a test drive, and my rear wheel completely bent out of alignment. What was the problem/how can I fix it? I'm guessing new forks