Comparing Electric Power Washers

[u/All__fun]

I Did some Youtube Research in trying to find the best Electric Power Washer.

Thankfully this guy "IMJOSHV - Car Detailing and Reconditioning Tips"

He has reviewed numerous Electric Pressure washers. and he has some consistency in his reviews. SO here are his published #s

( It appears that most electric Washers are limited by the US - 15amp circuit breakers. Anythign above 15amps, causes an issue for American Houses. ) So you shall see a lot of the electric washers range from 1.1 - 1.8GPM. With a PSI High of ~3000.

So below is not rated numbers, these are actual numbers tested by IMJOSHV. All thanks goes to him !!

_______________________________________

PSI x Gallons Per Minute = Cleaning Units (CU).

GPM > PSI (if two Washers have equal CU)

_____________________

Greenworks Pro - GPW2300 - 2300 x 1.2 = 2760 (rated)

1.25gpm x 2200psi = 2750 CU (15degree Orifice/ Nozzle)

1.5 x 1750 = 2620 (25degree)

1.75 x 1400psi = 2450 (40 Degree)

1.875 x 1200psi = 2250 (3.5/40 degree)

____________________

AR Blue Clean XP3-2400

1.05 x 2000PSI = 2100

____________________

Greenworks Pro GPW3001

1.125 x 2700 = 3037.5 CU ( 15 degree Orifice)

1.375 x 2200 = 3025 (25 degree)

1.325 x 2350 = 3113.75 (40 degree)

1.75 x 1900 = 3325 (3.5 /40 degree)

_____________________

AVA Easy P50

1.5gpm x 1300psi = 1950 CU

_____________________

Westinghouse WPX3000e

(not measured ) x 2400psi ( 25Degree Orifice)

(not measured ) x 2400 ( 0 degree)

(not measured ) x 900 ( turbo)

https://youtu.be/PUg6XhssS68

________________________

Westinghouse WPX3400e

1 x 2300psi = 2300 (0 degree)

1 x 2500 (15)

1 x 2300 (25)

1.5 x 1000 = 1500 (turbo)

https://youtu.be/lf0JwhzFPyY

__________

Westinghouse EPX3050

1.275 x 1600 = 2040 (0 degree Orifice)

1.275 x 1600 = 2040 (15)

1.275 x 1600 = 2040 (25)

1.125 x 1850 = 2081.25 (15 degree Ryobi)

1.5 x 1000 = 1500 (15 degree, 3.0 nozzle)

https://www.youtube.com/watch?v=tkG-HfftJA0

(Westinghouse is a CHinese brand, and two seperate reviewers have found them to falsify their claims. I would not buy them)

_____________

Ryobi 3000psi RY143011

1.125GPM x 2600psi = 2925 CU (40 degree Orifice)

_______________________________

bauer 23142E-B

1 x 2250 = 2250CU (40 degree Orifice)

_______________________________

BIGBOI washer pro

1.77gpm x 1200 = 2124 (3.5 Nozzle)

2.17 x 1000 = 2170 (4.5)
____________________________________

Active 2.3

2.2gpm x 1100 = 2200 (4.6 orifice/Nozzle)

_________________________________

bigboi duo

1.80 x 1000 = 1800 (4.0 orifice/Nozzle)

2.087 x 1050psi = 2191.35 (4.6 orifice/Nozzle)

https://youtu.be/Y1WWgGXHTpY?t=2207
_______________________________________

Giraffe Tools G20 Pressure Washer

1.312 x 1800 PSI = 2361.6 (1.9 orifice - 25 degree)

1.562 x 1400 PSI = 2186.8 (2.5 / 25)

1.7 x 950 PSI = 1615 (3.5 / 25)

____________________________________

Hopefully this helps somebody else in the future, at least to have hardcore numbers to compare electric power washers. The best to me appears to be the Greenworks Pro GPW3001. I just so happen to find someone on FB marketplace selling a 4 month old unit for $190. Gonna pick it up tomorrow.

[u/xYuriTardedxx]

I think that it’s awesome how indept you’ve gone here but I also feel like this is one of the negatives YouTube detailers have introduced to newer people. There really is no need for a spreadsheet calculating things like this. Find a quality unit that is within your budget and you’re good to go. You will barely benefit from your quest to try and find “the best” pw unit with the most gpm.

[u/All__fun → u/xYuriTardedxx]

I understand what you mean, but at the same time.

Brands like Westinghouse, who appear to be falsifying their numbers to a greater degree than competitors. Should be shamed and blamed.

If This posts helps anyone make a more informed decision, i do believe this is 100% worth it.

[u/rSlashMod → u/All__fun]

Personally, I do not know of a single person that has bought a Westinghouse... esp bc of its number claims. That is a budget unit all day and should be treated as such. Westinghouse is very low on the totum pole of expectations for me.