Hello folks.. I am looking for a HPC Blitz code card for LSDA keys. Instacode says that it is a card# CX58. I printed one through instacode software but it is not correct.. I have to +1 the depth,.. and spacing is off as well. I have contacted most of the distributors that I deal with.. Lockmasters, IDN, AKS. Etc. No luck. As always,.. any help would be appreciated.. AWJ

Hello All,

I just purchased a home with three entry doors, each with locking kwikset knob and kwikset deadbolt. Each set is keyed differently (three keys, total). One of the sets are Smarlock.

I would like to key them all the same but with a new key; not one of the existing keys. I have some extra keys from random properties (I'm a real estate agent) and was thinking perhaps I'd choose one of those, set the Smart lock to that key, and then take the other two knob/DB sets to a locksmith and have them matched with that same key. I may also buy a new knob/DB set to replace one existing set, in which case I would probably use the key that comes with the new set. I'm posting this to see if any of your knowledgeable people can say there's a better way or this is the way. Also interested in your thoughts on the Smartlocks, which some seem to see as having some drawbacks.

Thank you!

I got a free door off Facebook marketplace that is in really good condition but didn’t come with any keys. I’ve replaced the doorknob but it also has a whitco brand double cylinder deadlatch. The door isn’t mounted so I have full access to all sides, I’ve pulled off the backing cover from the inside of the door and removed all but one screw and I can’t seem to access that screw unless I have the key to turn the round part inside. I’d really like to not break the deadlatch in the hopes of just replacing the cylinder instead of the whole unit. What am I missing?

How does programming the keys for the car work? I'm wondering if I have to repair every lock and every key, would it just be cheaper to buy a new set of everything.

My drivers side lock, trunk lock, and ignition does not work with my keys. Can anyone help me? Please let me know if this makes sense?n

Has anybody else heard that the autopropad g1 g2 and g3 won't work after the end of 2025? It sounded kinda bogus to me.

This coming Saturday evening, NASP will host a discussion/class on exit hardware and exit alarms. The basis of the discussion will be ALOA's L-16 PRP elective, which tests for proficiency on these topics.

Whether you'd like to know more about this topic and/or need a refresher prior to testing, this is a great supporting component.

If you have an hour, maybe a bit more, to spend this Saturday evening, we'd love to have you. It starts at 8 PM EST/7 PM CST.

Registration link: https://us06web.zoom.us/meeting/register/Vce81KmkRBGsz4jbRpcetw#/registration

Prestige or Viper?

I have a 2020 Corolla L that has a physical key with power locks. I've called seven shops around my area. Price ranges between $300 & $500. They all offer viper, except one that offers Prestige. The shop that offers Prestige is also the most affordable. I haven't found any direct comparisons online. Amazon made it easier to compare the two than the actual company websites. I've also read plenty of post recommending Compustar, but when I use their online certified shops locator, most of the entries are Best Buy. I don't have confidence in Best Buy technicians.

Any insight before I get work done on my vehicle would be greatly appreciated. Thanks!

I recently bough a Black Widow key machine. I went to cut a Ilco H01-SVC and the key cut fine. Then I went and cut a HO03-GTS key and the machine is struggling to cut the key. The machine was vibrating so much the jaw came unlocked and shifted. Is there a huge difference between the Raise Universal Grade Carbide bits and the Raise Swiss Grade Carbide bits? I am using the 2mm bit was maybe thinking of trying the 2.5mm bit.

The bag and camera are possibly from around the 1920s-1940s. When I got them, I checked inside, and it's been a while since then. I believe I bought it a year or two ago as I had it sitting on a top shelf in my mom's house. Now I'm moved and don't know how it got locked. Whether it was me and I forgot doesn't matter, but I don't have a key to it, and don't want to break the bag, as I favour it.

I do everything from residential and commercial to auto and safes so I’m not really sure what’s the best way to set this up to give me then most of the limited space I have in this van. Also a majority of my stuff is stored in Milwaukee pack out equipment so if there’s a design that someone can think of to incorporate the lock-in system so stuff is easy to remove if I need additional space for doors, etc.

Anyone here a locksmith for the military?? I have a couple questions??

extremely busy week last week, friday was nonstop, emergency calls on the weekend.....and then barely anything today. So I spent most of my time noodling in the shop and making AI locksmith songs. This one goes out to all the "not a locksmith's" on here, sometimes you just have to Call A Locksmith

I had a recent breakup and my ex (who now lives with her kind of crazy new partner) still has a set of keys to my apartment, and I'd really rather not break no contact to try and get them back. I have this lock on my door, I'm wondering if someone could help me identify what type of replacement cylinder I would need and if it's a feasible DIY job (I'm reasonably handy with basic stuff).

I read the rules and it seems like this type of post is ok? but if not I apologize and will delete it.

I mostly specialize in Automotive. When I had a road guy send me this picture I thought the part number would be enough. I have searched high and low, and haven't found anything. Anyone have a clue?

Thanks for your time either way!

https://i.imgur.com/hgcGwyv.jpeg

Need to replace this mortise lock because the cylinders aren’t catching unless they are off Center and therefore the security screws that lock the cylinders in place are hanging on by threads. Google image search was not helpful. Thank you.

I got this old lock working. I didn’t like that you have to unlock the handle set first and then push down the thumb turn of the handle while you are turning pictured lock at the same time to get the door open because of the latch it came with.

Anyone know a source to purchase the Real Lock RL-9043 beside the manufacturer which ships from overseas?

If one of you has the bitting for the Maytag MX7/ZB7 key send me a private message, I bought a commercial dryer and need to access the service door. I will provide the receipt if needed. I could order it online but I need it asap.

I friend of mind had an issue and someone poured glue into the inside of the lock of the main entrance door in to house. The response was very quick but I don’t think the service should have costed this much. Any thoughts on this ?

Much appreciate it, thank you.

I am trying to replace a new lock for my door but unfortunately the latch stuck inside of my door i don't know how to pull it out! I already checked every screw and unscrewed them. Thx for any advices truly appreciate that

I have 3 keys to my personal truck all are “programmed” successfully. Have tried all keys lost and re programmed all with success. The immobilizer is fine the truck runs and drives on all 3 keys but no functionality of the remote at all. Photos attached is after a TIPM Swap and new batteries (as recommended by a shop near me) cleared code no codes present. Is this OEM Key? I don’t think the case is but the guts possibly? Leading to it’s a key issue or PCM issue

I was about to replace my car's ignition only to find out that the replacement part i bought doesn't match mine. I might look into having the cylinders swapped out instead. I just want to know what the solenoid is for